SAS Adapters & Cables

MiniSAS Multilane SAS cables for use with both SAS expander enclosures and SAS/ SATA enclosures, and SAS adapters to convert between them. All multilane connectors have 4-channels to driving 4 devices without or up to 256 when attaching to an expander module, usually in the storage enclosure. If you are looking for SAS cables or adapters to connect your backplanes, enclosures, controllers together, this is the section for you.

These SAS cables and SAS adapters are high quality, 6gbps or 12gbps certified and proven reliable over the many years we have been making and selling them. Many are available in large quantities. Not sure what cabling or adapter is right for your situation? We answer these questions all the time via phone, chat or email - contact us

Grouped by connector type:
SFF-8643SFF-8644SFF-8087SFF-8088SFF-8482, SFF-8484, SFF-8470

MiniSAS Adapters

4-Port SFF-8087 to SFF-8088 miniSAS Adapter

$28.90
External 8088 to internal 8087 adapter, will work both on the host and device side. Available on a slot-L bracket, centronics bracket or low-profile L-bracket - please specify which one is needed in the "Special Instructions" field during checkout. If you are converting from miniSAS to SATA, make sure you have the correct cable for your application. (SAS-AD8788-1)

8-Port SFF-8087 to SFF-8088 miniSAS Adapter

$38.90
Dual-connector external 8088 to internal 8087 adapter, will work both on the host and device side. Available on a slot-L bracket, centronics bracket or low-profile L-bracket - please specify which one is needed in the "Special Instructions" field during checkout. If you are converting from miniSAS to SATA, make sure you have the correct cable for your application. (SAS-AD8788-2)

8-port SFF-8644 to SFF-8643 12G HD Mini SAS Adapter

$59.99
Converts two internal SFF-8643 ports to two external SFF-8644 ports. Great for building your own enclosure or converting internal ports on a controller card to external. 12Gbp/s rated! Specify low profile, standard height L bracket or centronics bracket when ordering. (SAS-AD4443-2)

4 Internal 7pin SAS/SATA to External SAS 4X adapter Centronics bracket

$28.90
Perfect for upgrading existing enclosures to SAS or SATA. Supports 4 SAS or SATA hard drives. Device adapter only. If you need to convert internal SATA ports to external (Host), see SATA-4X7PL. (SAS-ADP7082)

4-port SFF-8088 to 7pin SAS miniPCI Adpt

$53.90
Input and Output adapter to 4 internal SAS bus connections with 8088 external cross over pin out. Attached to a Mini PCI bracket. SFF-8088 (device) to 7-pin (host) (SAS-AD8788LP)

4-port SFF-8088 to 7pin SAS PCI Adapter

$53.90
Input and Output adapter to 4 internal SAS bus connections with 8088 external cross over pin out. Attached to a PCI bracket. SFF-8088 (device) to 7-pin (host) (SAS-AD8788L)

8-port SFF-8088 miniSAS (host) to SAS/SATA 7pin (device) SAS Adapter

$88.90
This is the standard connector used on JBOD enclosures. In other words it's the device-end connector - the SFF-8088 miniSAS connectors attach to an HBA or RAID controller and the SATA ports connect to the backplanes or drives.Mounted on a Centronics 50 plate. (SAS-AD8788D)

8-port SFF-8088 to 7pin SAS PCI Adapter

$98.90
Input and Output adapter to 8 internal SAS bus connections with two 8088 external cross over pin out. Attached to a PCI bracket. SFF-8088 (device) to 7-pin (host) (SAS-AD8788LD)

SFF-8087 to SFF-8087 Female to Female Adapter/Coupler

$59.95
This is an inline coupler to connect two SFF-8087 cables together. (SAS-8787FF)
SATA Adapters

3.5" to 5.25" Hard Drive Mounting Brackets

$4.99
These metal brackets allow you to mount your SAS or SATA hard drive in a 5.25" bay. Screws included. (ACC-HDMOUNT)

5.25' Molex to Dual 5.25' Molex Power Y Splitter

$1.95
Convert a molex power connector into two molex power connectors. (ACC-5.25-5.25)

Coolmax ES-300 USB2.0 to eSATA converter

$14.99
Converts your eSATA enclosure to USB 2.0! Does not support port multipliers. Will support a single eSATA drive (or multiple drives already set up in a RAID) for connection to your USB 2.0 port. (USB-ES300)

eSATA to USB 3.0 Adapter w/PM Support

$35.99
Converts eSATA devices to any USB 3.0 port. Supports Port Multipliers. Perfect for Laptops as well as Desktops. Simply plug the USB stick into your computer, and plus in the eSATA cable from your enlcosure into this adapter. Supports Windows and MAC OS X. (SATA-USB3ESATA)

Internal SATA to External 4X L-bracket Adapter w/dual ports

$53.00
For host PC. Lets you convert eight internal SATA ports to two External 4X Multilane port in the back of the case. Thumbscrew-style connection. Please note that SATA port orientation may be vertical and not match the picture shown (SATA-4X7PLD)

SATA Male to 2xMolex Female Power Splitter

$3.95
Convert an existing SATA power connector from the PSU to two molex power connectors for devices. (SR-SAC-05)

SATA Power to 4Pin Power Converter

$1.99
Converts 4-pin standard MOLEX power connector from the power supply to SATA power connector for the hard drive. (SATA-PWR4P)
External MiniSAS Cables

2m SFF-8644 HD MiniSAS (host) to 4 x eSATA cable (device)

$59.50
Allows you to connect your eSATA enclosure to your HD MiniSAS controller card. Supports up to four eSATA drives per cable. Not to be used with port multplier enclosures since SAS cards do not support them. (SATAHDMS2MES)

SFF-8088 (host) to 4 ESATA fanout cable

From $47.99
External Mini-SAS to eSATA cable attaches to external storage devices with standard (I-type) eSATA port. (Available in 1m to 2m lengths) (SATA-MS-MES)

SFF-8088 to 2xSFF-8088 Fanout External SAS Cable

From $88.00
Multilane miniSAS cable, 6G rated, one SFF-8088 with four channels to two SFF-8088 with a single channel each. Typically used with tape drives, but can be used with other devices as well such as single drive enclosures. 3.3ft. (Available in 1m to 2m lengths) (SAS-F8888X2)

SFF-8088 to 4xSFF-8088 Fanout External SAS Cable

From $122.99
Multilane miniSAS cable, one SFF-8088 with four channels to four SFF-8088 with a single channel each. Attach 4 miniSAS devices (such as tape drives) to a single SFF-8088 host connector. (Available in 1m to 3m lengths) (SAS-F8888X4)

SFF-8088 to SFF-8088 External SAS Cable

From $36.99
Multilane miniSAS cable, 6G rated, commonly used between rackmount enclosures and SAS controllers. Standard length. (Available in 0.5m to 10m lengths) (SAS-8888)

SFF-8088 to SFF-8470 External SAS Cable

From $39.50
Multilane Infiniband SFF-8470 to miniSAS SFF-8088. Connect newer SAS cards to direct-connect tower enclosures. (Available in 0.5m to 3m lengths) (SAS-8870)

SFF-8470 to SFF-8470 External SAS Cable

From $42.50
Infiniband multilane cable with thumbscrew connectors on each end. Most comonly used length, 3.3ft. (Available in 0.5m to 5m lengths) (SAS-7070)

SFF-8644 to 2xSFF-8088 SAS Fanout Cable

From $123.30
Attach two miniSAS devices to one SFF-8644 host connector. (Available in 1m to 3m lengths) (SAS-F4488X2)

SFF-8644 to 2xSFF-8644 HD Mini SAS Fanout Cable

From $127.10
Attach 2 external SAS HD devices to one SFF-8644 external connector. (Available in 1m to 3m lengths) (SAS-F4444X2)

SFF-8644 to 4xSFF-8088 Mini SAS Fanout Cable

From $151.80
Attach 4 miniSAS devices to one SFF-8644 host connector. (Available in 1m to 3m lengths) (SAS-F4488X4)

SFF-8644 to 4xSFF-8644 HD Mini SAS Fanout Cable

From $147.90
Attach 4 SAS HD devices to 1 SFF8644 host connector. (Available in 1m to 3m lengths) (SAS-F4444X4)

SFF-8644 to SFF-8088 External SAS Cable

From $46.50
MiniSAS to HD MiniSAS cable, standard host to device or device-to device interconnect. Typical use is mixing 6G and 12G controllers and devices. (Available in 0.5m to 6m lengths) (SAS-8844)

SFF-8644 to SFF-8470 External SAS Cable

From $69.50
The 1 meter HD Mini SAS (SFF-8644) to 4X (SFF-8470) with thumbscrews. This cable can be used in InfiniBand, SAS 2.1 and Fibre Channel applications and it is RoHS compliant. 28awg Madison cable. (Available in 1m to 2m lengths) (SAS-4470)

SFF-8644 to SFF-8644 12G HD MiniSAS Cable

From $48.99
HD MiniSAS to HD MiniSAS cable. Standard SAS cabling for 12G RAID controllers or HBAs and 12G enclosures / devices. SFF-8644 connector on both ends. 1 meter in length. (Available in 0.5m to 6m lengths) (SAS-4444)

SFF-8644 to SFF-8644 48Gb/s HD MiniSAS Active Optical Cable

From $308.50
This active optical cable (AOC) is fully compliant to SAS 2.1 and SAS 3.0 industry standards as well as the SFF-8644 standard. Applications include cloud computing, enterprise storage, networking and communication. (Availible in 1m to 30m lengths) (SAS-4444AOC)
Internal Mini-SAS Cables

0.5m SFF-8087 to SFF-8482 x 4 Connectors With SATA Power Cable

$25.50
Connect a SAS controller with internal 36 pin miniSAS connector directly to the 29pin SAS connectors on your SAS hard drives. 4 drives per cable, also works with SATA drives. Power is supplied via the pass-through SATA power connectors, so you would need up to four SATA power connectors available. (SAS-F8782S-05M)

0.5m SFF-8484 (device) to SFF-8087(host) Internal SAS Cable

$38.99
For connecting a SAS backplane with SFF-8484 connector to a SAS/SATA controller with SFF-8087 connector. Note that some backplanes might be wired differently - this is the crossover cable. (SAS-84D87H-05M)

0.5M SFF-8484 to SFF-8484 Internal Cable

$29.50
Internal SAS multilane 32-pin cable (SFF-8484). (SAS-8484-05M)

0.6m SFF-8087 to SFF-8087 Mini-SAS Cable

$18.99
Internal 36 pin miniSAS interconnect between controllers, expanders, backplanes and internal-to-external adapters. 6G rated. SPECIAL PRICE! (SAS-8787-06M)

0.6m SFF-8484 (device) to 4xSATA (host) Fanout Cable

$15.00
Connect a SATA/SAS controller with 7 pin connectors to a backplane with 32 pin multilane connector. 50% off while supplies last (SAS-F7H84D-05M)

0.75m Right Angle SFF-8087 to 8087 SAS Cable

$22.99
Internal 36 pin miniSAS interconnect between controllers, expanders, backplanes and internal-to-external adapters. 6G rated. Right angle on one end (connector bends away from the latch clip), straight on the other. (SAS-8787RA-75)

11.5" SFF-8087 to SFF-8087 Short MiniSAS Cable

$12.99
Short internal 36 pin MiniSAS interconnect cable for between controllers, expanders, backplanes and internal-to-external adapters. 6G rated. Just 0.3m in length. (SAS-8787-11)

1m Right Angle SFF-8643 to SFF-8087 SAS Cable

$24.99
Internal Right Angle HD Mini SAS SFF-8643 - Mini SAS 36 SFF-8087. (SAS-RA4387-1M)

1m SFF-8484 (device) to 4xSATA (Host) Fanout Cable

$34.50
Connect a SATA/SAS controller with 7 pin connectors to a backplane with 32 pin multilane connector. (SAS-F7H84D-1M)

1m SFF-8484 to SFF-8087 Crossover SAS Cable

$39.50
For most applications, this will be used to connect a SAS backplane with multilane SFF-8087 32 pin connector to a SAS/SATA controller with SFF-8484 36 pin miniSAS connector. However keep in mind SFF-8484 is applied differently across manufacturers, so you may need the straight-thru cable. (SAS-84D87H-1M)

7pin SATA to SFF-8482 SAS Cable

From $12.99
Use this cable to attach a SAS controller with SATA connectors to your SAS hard drive. Power is supplied via the pass-through molex power connector. (Available in 0.5m to 1m lengths) (SAS-S782)

Right Angle SFF-8643 to SFF-4343 SAS Cable

From $36.99
Internal Right Angle HD Mini SAS SFF-8643 - HD Mini SAS SFF-8643. (Available in 0.5m to 1m lengths) (SAS-4343RA)

SFF-8087 (device) to 4xSATA (host) Fanout Cable

From $27.00
Connect your controller or enclosure rear bracket with SATA 7-pin connectors to your backplane or internal-to-external adapter with miniSAS 36 pin connector. (Available in 0.5m to 1m lengths) (SAS-F7H87D)

SFF-8087 (host) to 4x 7 pin SATA (device) Internal SAS/SATA Fanout Cable

From $16.99
Connect your controller, enclosure rear bracket or expander with 36 pin miniSAS connectors to your backplanes with SATA 7 pin connectors or directly to your SATA hard disks. (Available in 0.5m to 1m lengths) (SAS-F87H7D)

SFF-8087 to SFF-8087 SAS Cable

From $22.99
Internal 36 pin miniSAS interconnect between controllers, expanders, backplanes and internal-to-external adapters. 6G rated. (Available in 0.5m to 1m lengths) (SAS-8787)

SFF-8087 to SFF-8482 x 4 Fanout SAS Cable

From $25.50
Connect a SAS controller with internal 36 pin miniSAS connector directly to the 29pin SAS connectors on your SAS hard drives. 4 drives per cable, also works with SATA drives. Power is supplied via the pass-through molex power connectors, so you would need up to four molex-style power connectors available - see Related Items on the description page for adapters that may help. (Available in 0.5m to 1m lengths) (SAS-F8782)

SFF-8484 to SFF-8087 Straight-thru SAS Cable

From $39.00
For most applications, you can use this to connect a SAS backplane with 36 pin SFF-8087 miniSAS connector to a SAS controller with SFF-8484 32 pin multilane connector. However keep in mind SFF-8484 is applied differently across manufacturers, so you may need the crossover cable. (Available in 0.5m to 1m lengths) (SAS-87D84H)

SFF-8484 to SFF-8482 x 4 Fanout SAS Cable

From $43.99
Connect a SAS controller with internal 32 pin multilane connector directly to the 29pin SAS connectors on your SAS hard drives. 4 drives per cable, also works with SATA drives. Power is supplied via the pass-through molex power connectors, so you would need up to four molex-style power connectors available - see Related Items on the description page for adapters that may help. (Available in 0.5m to 1m lengths) (SAS-F8284)

SFF-8484(host) to 7 pin SATA(device) Internal SAS/SATA cable

From $29.50
Connect a SAS controller with 32 pin multilane connection to SATA drives or backplane with 7-pin SATA connectors. (Available in 0.5m to 1m lengths) (SAS-F84H7D)

SFF-8643 (host) to 4x7pin (device) Internal SAS cable

From $24.90
Connects to a controller with an SFF-8643 connector and supports up to four 7pin SATA or SAS drives. Usually used for connecting controller to a backplane with 7pin connections. 12Gb/s rated. (Available in 0.5m to 1m lengths) (SAS-F43H7D)

SFF-8643 to 4xSFF-8482 Internal SAS Cable

From $36.90
Connects to controller card with SFF-8643 connector and supports up to four SAS/SATA hard drives. 12Gb/s rated. (Available in 0.5m to 1m lengths) (SAS-F4382)

SFF-8643 to SFF-8087 SAS Cable

From $25.99
Connect SFF-8643 controllers to SFF-8087 backplanes, adapters, expanders etc. 12Gb/s rated. (Available in 0.5m to 1m lengths) (SAS-4387)

SFF-8643 to SFF-8643 Internal HD SAS cable

From $18.99
Internal HD Mini SAS cable typically used for connecting controller cards to internal backplanes. 12Gb/s rated. (Available in 0.5m and 1m lengths) (SAS-4343)
Internal to External SAS Cables

1m 4xSATA (device) to SFF-8644 (host) Fanout Cable

$58.99
Connect the HD miniSAS port on your controller to your hard drives/backplane via 4 x internal SATA connectors. 3.3ft. 12Gb/s rated. (SAS-F44H7ID-1M)

1m SFF-8087 to SFF-8470 SAS Cable

$44.50
Connect internal 36pin miniSAS connectors on a SAS controller directly to an external enclosure with SFF-8470 Infiniband connectors. 3.3ft. (SAS-8770-1M)

1m SFF-8643 to SFF-8088 MiniSAS Cable

$59.99
Connect an internal 12G SFF-8643 connector to your external SFF-8088 6G device. Perfect for when you don't have an external port card. Just connect to the internal port on your controller card and route out the back of your case to your external storage chassis. (SAS-8843-1M)

1m SFF-8644 to 4xSFF-8482 Fanout Cable

$58.99
Allows you to connect up to four SAS/SATA hard drives to an SFF-8644 HD MiniSAS interface. 3.3ft. 12Gb/s rated. (SAS-F4482-1M)

4xSATA (device) to SFF-8088 (host) Fanout Cable

From $37.50
Connect the miniSAS 26 pin port on your controller to your hard drives/backplane via 4 x internal SATA connectors. (Available in 0.5m to 2m lengths) (SAS-F88H7ID)

4xSATA (host) to SFF-8088 (device) Fanout Cable

From $57.00
Connect an external Mini SAS 26 pin enclosure to 4 x internal SATA controller ports. 3.3ft. (Available in 1m to 2m lengths) (SAS-F7IH88D)

SFF-8087 to SFF-8088 SAS Cable

From $47.99
Multilane external miniSAS 26 to an internal miniSAS 36. 6G rated. Commonly used to connect SAS controllers with internal connectors to enclosures, or controllers with external connectors to backplanes. (Available in 1m to 2m lengths) (SAS-8887)

SFF-8088 to SFF-8482 Fanout SAS Cable

From $58.90
Connect the external miniSAS 26 pin connector on your controller to four 29pin SAS connectors on your SAS hard drives. Also works with SATA drives. Power is supplied via the pass-through molex power connectors, so you would need up to four molex-style power connectors available - see Related Items on the description page for adapters that may help. (Available in 1m to 2m lengths) (SAS-F8882)

SFF-8644 HD Mini SAS to SFF-8643 HD Mini SAS cable

From $56.99
Connect internal HD mini SAS ports on a SAS controller directly to an external enclosure with an SFF-8644 HD mini SAS port. 12Gb/s rated. (Available in 1m to 2m lengths) (SAS-4443)

SFF-8644 HD miniSAS External to SFF-8087 miniSAS Internal Cable

From $54.99
Connect your controller's external SFF-8644 controller with internal backplanes, adapters, expanders etc. Not directional, so will work with all applications as long as connectors match. 12Gb/s rated. (Available in 0.5m to 2m lengths) (SAS-4487)

SFF-8644 to 2xSFF-8482 Fanout Cable

From $49.00
Allows you to connect up to two SAS/SATA hard drives to an SFF-8644 HD MiniSAS interface. 12Gb/s rated. (Available in 0.5m to 2m lengths) (SAS-F4482X2)

Here's What Our Customers Have To Say About Us

PC PitStop logoWe've been selling computer storage online since 1999 and have built a loyal following of Fortune 500 companies, educational institutions, government agencies, multimedia studios, consultants, you name it.

Our mission is to be competitive on selection and prices, while providing truly unmatched personal service. Everyone you reach here has in-depth experience with RAID storage. This means we can provide real-world insight into topics like performance, compatibility, bang for the buck, and the best solution for your needs.

PC PitStop | 16321 Westwoods Business Park | Ellisville, MO 63021
Toll Free: (800) 298-4173 | Local: (636) 527-5924
Hours: Monday to Friday, 9AM - 5PM CST | Email: [email protected]