SCSI to SATA/IDE/USB Adapters
ACARD's SCSI-IDE and SATA bridges support most platforms and/or Operating System including PC Windows 98/ME/NT2000/XP and Linux platforms. With an IDE/SATA device installed into the bridge, it can be connected to a SCSI host adapter and works as a standard SCSI peripheral. They are typically used with cheap large capacity IDE/SATA drives or optical drives. If you have any questions, we can answer them very efficiently during business hours via phone or live chat. Your emails are also welcome anytime.
If you want to use a SCSI drive on an IDE bus, unfortunately it is not possible. The best and simplest way to go about it is to use a low cost SCSI controller - please see our SCSI controllers section.
SCSI Hard Disk to USB Conversion kit
Convert your 68-pin (or 80 & 50 pin with optional adapters) SCSI drives to USB mass storage devices with a Ratoc adapter. Includes the required external adapter, terminator, power supplies for both the hard drive and ratoc.
Convert your 68-pin (or 80 & 50 pin with optional adapters) SCSI drives to USB mass storage devices with a Ratoc adapter. Includes the required external adapter, terminator, power supplies for both the hard drive and ratoc.
Ratoc U2SCX USB 2.0 to SCSI Converter
U2SCX turns your SCSI device into a USB device. For external HD, removable HD, Jazz, ORB, optical drives, scanners, tape drives. PC & MAC compatible. To connect internal SCSI hard drives, please use our kit above as extra components are required. Please note that compatibility may vary amongst SCSI devices and cannot be guaranteed.
U2SCX turns your SCSI device into a USB device. For external HD, removable HD, Jazz, ORB, optical drives, scanners, tape drives. PC & MAC compatible. To connect internal SCSI hard drives, please use our kit above as extra components are required. Please note that compatibility may vary amongst SCSI devices and cannot be guaranteed.
ACARD SCSI to IDE Adapter, Model AEC-7720U
Ultra SCSI-IDE bridge. Converts 40pin IDE to 50pin Male SCSI interface. Supports IDE ATAPI devices such as CD-ROM, CD-R/RW, and DVD-ROM (not for hard drives).
Ultra SCSI-IDE bridge. Converts 40pin IDE to 50pin Male SCSI interface. Supports IDE ATAPI devices such as CD-ROM, CD-R/RW, and DVD-ROM (not for hard drives).
ACARD SCSI to IDE Adapter, Model AEC7722
LVD SCSI interface for up to 80MB/sec data transfer rate; Supports ATAPI Devices, CD-ROM/CDRW/DVD/DVDRW, Zip Drives or Tape Drives (not for hard drives).
LVD SCSI interface for up to 80MB/sec data transfer rate; Supports ATAPI Devices, CD-ROM/CDRW/DVD/DVDRW, Zip Drives or Tape Drives (not for hard drives).
ACARD SCSI to IDE Adapter Model AEC7726Q
Convert your ATA 133/100/66 hard drive to 68 pin LVD U160 SCSI interface! Great for using large inexpensive IDE drives to greatly expand SCSI storage.
Convert your ATA 133/100/66 hard drive to 68 pin LVD U160 SCSI interface! Great for using large inexpensive IDE drives to greatly expand SCSI storage.
ACARD SCSI to SATA Adapter AEC-7730A
Convert your SATA hard drive to 68 pin LVD U160 SCSI interface! Great for using large inexpensive SATA drives to greatly expand SCSI storage.
Convert your SATA hard drive to 68 pin LVD U160 SCSI interface! Great for using large inexpensive SATA drives to greatly expand SCSI storage.
ACARD SCSI to SATA Adapter AEC-7730SA
Convert your SATA optical drive to 68 pin LVD SCSI interface! (not for hard drives).
Convert your SATA optical drive to 68 pin LVD SCSI interface! (not for hard drives).
AC Adapter for Ratoc U2SCX / FR1SX
Both FR1SX and U2SCX work with term power from the SCSI device. If the SCSI device doesn't supply term power to SCSI bus, you need this optional AC adapter. Typically needed for newer hard drives (LVD/U160/U320).
Both FR1SX and U2SCX work with term power from the SCSI device. If the SCSI device doesn't supply term power to SCSI bus, you need this optional AC adapter. Typically needed for newer hard drives (LVD/U160/U320).
![]() |
|
| Copyright © 1999-2009 PC PitStop, all rights reserved (Why Buy From Us?) |










