Highpoint RocketRAID 644 PCIe 2.0 SATA 3.0 RAID Controller

SATA Revision 3.0 provides dramatically improves performance by doubling the bandwidth available for storage devices to 600MB/s. The RocketRAID 600 series are designed to optimize storage performance and redundancy with RAID levels 0, 1, 5, 10, and JBOD.

Feature Highlights

• PCI-Express Bus Lanes: 2.0 x 4
• SATA 6Gb/s RAID Controller: Marvell 88SE9128
• SATA Interface: SATA 3.0
• Port / Connector Type: 4 eSATA
• RAID Level: 0, 1, 5, 10, JBOD
• Form Factor: Full Height
• Board Dimensions: 3.46" L x 4.17" W
• Alarm/Buzzer: Yes
• NVRAM: Yes
• Activity/Failure LED: N/A
• SAF-TE Connector: Yes
• Port Multiplier: Up to 20 Hard Disks

Controller Specifications

Maintenance and Management Settings:

• Online capacity expansion (OCE) and Online RAID level migration (ORLM)
• RAID Array Roaming
• Unplug/Remove RAID array
• Hot key (ctrl-h) boot-up RAID manager via BIOS
• Firmware update while running the Operating System
• Verify RAID Array for Bad Sectors and Parity Check
• Task Scheduler
• Automatic RAID rebuild
• Automatic drive (insert / removal) detection
• Hot Spare Disk
• Staggered Drive Spinup
• Rebuild Priority (Low - Highest)
• Spin Down Idle Mode
• Hot Swap and Hot plug
• Bad sector repair and remapping to reduce dropped drives
• Multiple RAID array
• Multiple Logical Drive
• 64bit LBA support greater than 2TB per volume

RAID Monitoring Tools:

• SMTP for email notification
• Alarm / Buzzer alerts for drive failure
• Hard Drive LED indicators (Activity and Failed)
• SHI (Storage Health Inspector – Drive analysis from S.M.A.R.T)
• Event Log

RAID Management Suite:

• OCommand Line Interface (CLI)
• Web browser-base RAID management software
• API

Environmental Information:

• Operating Temperature
  • Work Temp: +5°C ~+ 55°C
  • Storage Temp: -20°C ~ +80°C
  • Relative Humidity: 5% ~ 60% non condensing
• Operating Voltage
  • PCI-E 3.3V (1W max) / PCI-E 12V (3W max)
• Regulator Certification
  • EMI: FCC Part 15 Class B and CE
• MTBF
  • Mean Time Before Failure 920,585 Hours

Related Items

External 5-drive eSATA enclosure with Port Multiplier
The port multiplier in this enclosure allows for an extra 5th drive while using only a single eSATA cable (included). Any SATA drive can be used, as well as PM capable Highpoint and Silicon Image controllers. Drives are mounted using the included brackets. eSATA cable included.

$189.99

Part#:
SC-SAT05B

External 5-bay eSATA Enclosure with Port Multiplier w/optional USB3 support
The port multiplier in this enclosure allows for an extra 5th drive and hot-swapping even in JBOD mode (with a Silicon Image controller) while using only a single eSATA cable (included). Any SATA drive can be used, as well as PM capable Highpoint controllers. Quiet, efficient cooling with alarms. eSATA cable included. Add the optional USB3 adapter to make it into a USB3 JBOD!

$279.99

Part#:
SC-SAT05PM

External 10-bay eSATA Enclosure with Port Multipliers w/optional USB3 support
The port multipliers in this enclosure allows for two extra drives and hot-swapping even in JBOD mode (with a Silicon Image controller) while using only two eSATA cables (included). Any SATA drive can be used, as well as PM capable Highpoint controllers. Quiet, efficient cooling with alarms. eSATA cables included. Add the optional USB3 adapter to make it into a USB3 JBOD!

$479.99

Part#:
SC-SAT10PM

1U Rackmount SATA Port Multiplier Enclosure w/optional USB3 support
Rackmount 1U Hot-swap SATA-II enclosure for (4) 3.5" SATA hard disks. Single eSATA connection to port-multiplier capable controller card. 300W high quality power supply. 4 cooling fans. eSATA cable included. Add the optional USB3 adapter to make it into a USB3 JBOD!

$429.99

Part#:
SC-SAT4PM1U

20-Bay 4U Rackmount Port Multiplier SATA Enclosure
Supports up to (20) SATA-II hard drives via (4) eSATA connectors. Uses Silicon Image 3726 port multipliers. 460W Zippy Power Supply. Includes trays and eSATA cables.

$1,299.00

Part#:
SC-PM20RM