SATA Enclosures
Our SATA enclosures offer reliable, inexpensive external storage with or without hotswap capability and employ either eSATA or multilane connectors. The multilane connectors allow the use of more advanced RAID controllers with your enclosure. We have included detailed configuration information on the description pages, enabling you to purchase a complete solution including hard drives, controller and cabling.
All enclosures are rated for 6.0 gbps SATA III (or SAS 2.0) speeds. Some of the units will also support SAS drives, but only when paired with a SAS controller. We also have additional trays should you need them.
If you have any questions, please contact us or check our new SATA Enclosure FAQ.
![]() |
![]() |
![]() |
![]() |
![]() |
You can get 15 drives in one box using only a single cable SFF-8088 connection for maximum compatibility and flexibility. Use SAS drives for excellent speed or SATA drives for heaps of storage space. Multiple enclosures can be daisy-chained for even more space. 2400MB/sec bandwidth over a single cable when used with 6gbps drives. Fully hotswappable, lockable trays with individual power switches. Fan failure & temperature alarms. 460W Zippy power supply.
Part#:
SC-SAS156G
Use up to 4 SATA drives in this cost-effective steel enclosure with built in power supply. Full-speed, terabytes of additional external storage attaches via SFF-8470 connector to your SATA or SAS controller card using a single multilane cable. Drives are mounted using the included 5.25" to 3.5" brackets (no hotswap trays).
Part#:
SC-SAT44XB
Convenience of hot-swapping 3.5" SATA drives without having to mount each drive in a tray! High speed SFF-8470 4X multilane single-cable connection to the controller installed in your server. Functional drive activity lights and dual 80mm fans for cooling and 300W power supply.
Part#:
SC-SAT44XT
External 3.5" storage in tower form, with high-bandwidth SFF-8470 multilane single-cable connection to the controller installed in your PC. Fully hotswappable, lockable trays with individual power switches. Fan failure & temperature alarms. 300W power supply.
Part#:
SC-SAS4
External 3.5" storage in tower form, with high-bandwidth SFF-8470 multilane single-cable connection to the controller installed in your PC. Fully hotswappable trays with keylock. Aluminum with anodized surface for maximum cooling. Built-in backplane design with no internal cable for best signal integrity. Fan failure & temperature alarms.
Part#:
SC-RM750S
Use up to 8 SATA drives in this cost-effective steel enclosure with built in power supply. Full-speed, terabytes of additional external storage attaches via SFF-8470 connector to your SATA or SAS controller card using two multilane cables. Drives are mounted using the included 5.25" to 3.5" brackets (no hotswap trays).
Part#:
SC-SAT84XB
Convenience of hot-swapping 3.5" SATA drives without having to mount each drive in a tray! High speed SFF-8470 4X multilane dual-cable connection to the controller installed in your server. Functional drive activity lights and three 80mm fans for cooling. 300W power supply.
Part#:
SC-SAT84XT
External 3.5" storage in tower form, with high-bandwidth SFF-8470 multilane dual-cable connection to the controller installed in your PC. Fully hotswappable, lockable trays with individual power switches. Fan failure & temperature alarms. 300W power supply.
Part#:
SC-SAS8
External 3.5" storage in tower form, with high-bandwidth SFF-8470 multilane single-cable connection to the controller installed in your PC. Fully hotswappable trays with keylock. Aluminum with anodized surface for maximum cooling. Built-in backplane design with no internal cable for best signal integrity. Fan failure & temperature alarms.
Part#:
SC-RM760S
12 hot swappable SATA drives without the need for trays! Connects to the controller via 3 multilane connectors. Perfect when your storage needs exceed the capacity offered by our 8-bay units but you don't want to incur the additional expense of an expander enclosure. 460W server-grade Zippy power supply.
Part#:
SC-SATA12T
Compact, super-quiet 1U rackmount hot-swap enclosure for 3.5" SAS/SATA hard disks with high quality power supply. SFF-8088 Mini-SAS connector for single-cable connection to the controller installed in your server. Temperature & fan failure alarms. Rails are included!
Part#:
SC-SAS4X41U
2U rackmount hot-swap enclosure for 3.5" SAS/SATA hard disks, with high quality Zippy power supply. Two SFF-8088 Mini-SAS connectors attach to the controller installed in your server. Temperature & fan failure alarms. Rails are included!
Part#:
SC-SATA8RM
2U rackmount hot-swap enclosure for 3.5" SAS/SATA hard disks, with high quality redundant power supply. Two SFF-8088 Mini-SAS connectors attach to the controller installed in your server. Temperature & fan failure alarms. Rails are included!
Part#:
SC-SATA8RMD
For maximum storange in minimum space, our 2U rackmount 24-bay 2.5" enclosure fits the bill. Highlights include Zippy dual redundant power supply, exceptional cooling with 112CFM airflow, built in 6gbps SAS expander (2400MB/sec bandwidth) with daisy chaining, zoning and single-cable connection to the host, fan, voltage and temperature monitoring and alarms. Rails included.
Part#:
SC-SAS2U24
12 hot-swappable SATA drives in high quality steel enclosure with a space-saving 2U form factor. 3 SFF-8088 4X connectors on the back can be used with our 4x combo cable and L-bracket kits. Fan failure/temperature alarms. Four quiet internal fan ensure effective cooling. Rails are included!
Part#:
SC-SAT122U
12 hot-swappable SATA drives in high quality steel enclosure with a space-saving 2U form factor. 3 SFF-8088 4X connectors on the back can be used with our 4x combo cable and L-bracket kits. Fan failure/temperature alarms. 420W Redundant power supply for uninterrupted uptime. Rails are included!
Part#:
SC-SAT122URD
Our 12 bay hot-swappable rackmount 4U JBOD SATA enclosure has 3 4x connectors on the back and can be used with our 4x combo cable and L-bracket kits. Effective, low-noise cooling is assured by internal and 3 external fans. Can be used as a tower as well.
Part#:
SC-SATA12RMT
Our 12 bay hot-swappable rackmount 4U JBOD SATA enclosure has 3 4x connectors on the back and can be used with our 4x combo cable and L-bracket kits. Effective cooling is assured by internal and 3 external fans. Can be used as a tower as well. This version also has a redundant 500W power supply.
Part#:
SC-SATA12RMTD
SAS/SATA JBOD with 12 hot-swappable bays in 2U form factorr. Connects to a SAS controller through a single SFF-8088 multilane connector with 2400MB/sec bandwidth when used with 6gbps drives. You can daisy-chain several for up to 128 drives! Dual 80x38mm fans provide excellent cooling with fan failure alarm and high-temperature alarm and monitoring. Also provides drive failure indicators. High quality Zippy power supply and sliding rails built-in.
Part#:
SC-SASE12S6G
SAS/SATA JBOD with 12 hot-swappable bays in 2U form factorr. Connects to a SAS controller through a single SFF-8088 multilane connector with 2400MB/sec bandwidth when used with 6gbps drives. You can daisy-chain several for up to 128 drives! Dual 80x38mm fans provide excellent cooling with fan failure alarm and high-temperature alarm and monitoring. Also provides drive failure indicators. High quality Zippy power supply and sliding rails built-in.
Part#:
SC-SASE126G
For maximum storage in minimum space, our sturdy and robust SAS/SATA JBOD provides 16 hot-swappable bays in 3U form factor. Connection to your SAS/SATA controller is through 4 SFF-8088 SAS connectors. Dual fans and horizontal backplane design provide effective cooling with fan failure alarm and high-temperature alarm. 650W + 350W redundant power supply and sliding rails built-in.
Part#:
SC-SAT16RM
SAS/SATA JBOD with 16 hot-swappable bays in 3U form factor. Connects to a SAS controller through a single SFF-8088 multilane connector with 2400MB/sec bandwidth when used with 6gbps drives. You can daisy-chain several for up to 128 drives! Dual 80x38mm fans provide excellent cooling with fan failure alarm, high-temperature alarm and monitoring. Also provides drive failure indicators. High quality triple-redundant Zippy power supply and sliding rails built-in.
Part#:
SC-SASE166G
Now with built in SAS-Expander! For maximum storage in minimum space, our sturdy and robust SAS/SATA JBOD provides 24 hot-swappable bays in 4U form factor. Connection to your SAS/SATA controller is through a single SFF-8088 multilane connector with 2400MB/sec bandwidth. You can daisy-chain several units for up to 128 drives! Dual 120x38mm fans provide excellent yet quiet cooling with fan failure alarm and high-temperature alarm. Also provides drive failure indicators. 650W redundant power supply and sliding rails built-in.
Part#:
SC-SASE246G
Integrated custom design, multiple host interfaces (with 3.0Gbps eSATA, FireWire 800, iSCSI/AoE and USB3) and high-end built-in Areca RAID 6 controller makes this a most flexible all-in-one solution for both PC and Mac.
Part#:
DS-ARC-5040
Supports up to (2) 2.5" SATA hard drives, eSATA and USB2.0 interfaces, integrated RAID 0, 1 and JBOD, small form factor, hotswap trays
Part#:
SC-ESAT1822UESR
Use 2 SATA drives in this tiny enclosure with built in RAID 0, 1 and JBOD capability. Both eSATA and USB2 interfaces are provided for speed and portability. Cables are included. Model SNT-ESATA232UESR.
Part#:
SC-ESATA232UESR
Use up to 4 SATA drives in this cost-effective steel enclosure with built in power supply. Full-speed, terabytes of additional external storage attaches via 4 eSATA connections. Drives are mounted using the included 5.25" to 3.5" brackets (no hotswap trays).
Part#:
SC-SAT4EB
4 hotswap trays for convenient access and easy hot swap on HD failure in make this an ideal enclosure for small RAID arrays or JBOD backup systems. Quiet, efficient cooling with alarms and 4 standard eSATA connectors.
Part#:
SC-SAT4E
Enjoy hotswap ability without having to mount each drive in a tray! Trayless hotswap mechanism for convenient access will work with any SATA drive. Four separate eSATA ports on the back - one for each drive. Cables not included.
Part#:
SC-SATA4ET
Compact, stylish, super-quiet 1U rackmount hot-swap SAS/SATA enclosure for 4 3.5" SAS/SATA hard disks. 4 standard eSATA connectors. Temperature & fan failure alarms round out the package. Rails are included!
Part#:
SC-SATAE41U
![]() |
Our mission is to be competitive on selection and prices, while providing truly unmatched personal service. Everyone you reach here has in-depth experience with RAID storage. This means we can provide real-world insight into topics like performance, compatibility, bang for the buck, and the best solution for your needs. Call 1-800-298-4173, email sales@pc-pitstop.com, or click the live chat button for help.
|
| Policies | Information | Availability | |||
| Privacy | About Us | Canada | |||
| Payment | St. Louis | Europe | |||
| Shipping | Education | Australia | |||
| Returns | Government | Worldwide | |||
| Location: PC PitStop | 16321 Westwoods Business Park | Ellisville, MO 63021 |
| Toll Free: (800) 298-4173 | Local: (636) 527-5924 | Fax: (707) 598-2734 |
| Hours: Monday to Friday, 9AM - 5PM CST | Email: sales@pc-pitstop.com |
| Copyright © 1999-2012 PC PitStop, all rights reserved, all customers served |














We've been selling computer storage online since 1999 and have built a loyal following of Fortune 500 companies, educational institutions, government agencies, multimedia studios, consultants, you name it.