SATA Cables & Adapters
We have a wide selection of SATA cables, adapters and accessories for connections between backplanes, controllers and enclosures. Most cables and adapters using SATA or eSATA connections can be found below but if you don't see something, please check the SAS cables page (there is quite a bit of overlap) or contact us as we have cables that are not listed.
grouped by connector type: SFF-8087, SFF-8088, SFF-8470, SFF-8482, SFF-8484
 |
 |
 |
 |
1-Port SFF-8087 to SFF-8088 Adapter
External 8088 to Internal 8087 L Bracket Adapter (Host), Converts an Internal port on your SAS/SATA controller to External. Supports up to 4 hard drives.
External 8088 to Internal 8087 L Bracket Adapter (Host), Converts an Internal port on your SAS/SATA controller to External. Supports up to 4 hard drives.
2-Port SFF-8087 to SFF-8088 Adapter
External 8088 to Internal 8087 L Bracket Adapter (Host), Converts Two MiniSAS Internal ports on your SAS/SATA controller to External. Supports up to 8 hard drives.
External 8088 to Internal 8087 L Bracket Adapter (Host), Converts Two MiniSAS Internal ports on your SAS/SATA controller to External. Supports up to 8 hard drives.
4-Port SFF-8087 to SFF-8088 Adapter
External 8088 to Internal 8087 L Bracket Adapter (Host), Converts up to Four MiniSAS Internal ports on your SAS/SATA controller to External. Supports up to 16 hard drives.
External 8088 to Internal 8087 L Bracket Adapter (Host), Converts up to Four MiniSAS Internal ports on your SAS/SATA controller to External. Supports up to 16 hard drives.
4X-(4) SATA Adapter board, cross-over wiring
For host PC. Lets you convert four internal SATA ports to one External 4X Multilane port in the back of the case. Thumbscrew-style connection.
For host PC. Lets you convert four internal SATA ports to one External 4X Multilane port in the back of the case. Thumbscrew-style connection.
Internal SATA to External 4X L-bracket Adapter, low profile
For host PC. Lets you convert four internal SATA ports to one External 4X Multilane port in the back of the case. Thumbscrew-style connection. For low profile cases.
For host PC. Lets you convert four internal SATA ports to one External 4X Multilane port in the back of the case. Thumbscrew-style connection. For low profile cases.
Internal SATA to External 4X L-bracket Adapter w/dual ports
For host PC. Lets you convert eight internal SATA ports to two External 4X Multilane port in the back of the case. Thumbscrew-style connection.
For host PC. Lets you convert eight internal SATA ports to two External 4X Multilane port in the back of the case. Thumbscrew-style connection.
2-Port eSATA Int/Ext Adapter on L bracket
Perfect for converting onboard SATA ports to eSATA. Includes regular PCI bracket and hard to find low profile bracket for small form factor computers!
Perfect for converting onboard SATA ports to eSATA. Includes regular PCI bracket and hard to find low profile bracket for small form factor computers!
Silicon Image Port Multiplier with 3726 Chip
Centronics mount. Used for external enclosures. Supports up to 5 SATA-II hard drives through a single eSATA cable. Port multiplier aware controller required.
Centronics mount. Used for external enclosures. Supports up to 5 SATA-II hard drives through a single eSATA cable. Port multiplier aware controller required.
Silicon Image Port Multiplier with 4726 Chip
Hardware RAID. Supports PM capable controllers as well as non-PM controllers. Easy configuration using GUI applet. Supports RAID 0, 1, 10 with hot spare, Spanning and JBOD.
Hardware RAID. Supports PM capable controllers as well as non-PM controllers. Easy configuration using GUI applet. Supports RAID 0, 1, 10 with hot spare, Spanning and JBOD.
4-Port eSATA Centronics Bracket
Perfect for converting external enclosures to SATA. Centronics mount.
Perfect for converting external enclosures to SATA. Centronics mount.
eSATA to USB 3.0 Adapter w/PM Support
Converts eSATA devices to any USB 3.0 port. Supports Port Multipliers. Perfect for Laptops as well as Desktops. Supports Windows and MAC OS X.
Converts eSATA devices to any USB 3.0 port. Supports Port Multipliers. Perfect for Laptops as well as Desktops. Supports Windows and MAC OS X.
SATA Power to 4Pin Power Converter
Converts 4-pin standard MOLEX power connector from the power supply to SATA power connector for the hard drive.
Converts 4-pin standard MOLEX power connector from the power supply to SATA power connector for the hard drive.
SATA Male to 2xMolex Female Power Splitter
Convert an existing SATA power connector to two molex power connectors.
Convert an existing SATA power connector to two molex power connectors.
1m eSATA to eSATA External Cable
Standard length shielded eSATA cable for connecting controller card to an enclosure.
Standard length shielded eSATA cable for connecting controller card to an enclosure.
2m eSATA to eSATA External Cable
Standard length shielded eSATA cable for connecting controller card to an enclosure.
Standard length shielded eSATA cable for connecting controller card to an enclosure.
1m eSATA to SATA Cable
For situations where one of the external ports is not eSATA, but regular SATA instead.
For situations where one of the external ports is not eSATA, but regular SATA instead.
1m SFF-8088 (host) to 4 ESATA fanout cable
External Mini-SAS to eSATA cable attaches to external storage devices with standard (I-type) eSATA port. 1m length.
External Mini-SAS to eSATA cable attaches to external storage devices with standard (I-type) eSATA port. 1m length.
2m SFF-8088 (host) to 4 ESATA fanout cable
External Mini-SAS to eSATA cable attaches to external storage devices with standard (I-type) eSATA port. 2m length.
External Mini-SAS to eSATA cable attaches to external storage devices with standard (I-type) eSATA port. 2m length.
1m SFF-8470 to 4 x eSATA Fanout Cable
Shielded cabling. Host to eSATA target. 1m in length.
Shielded cabling. Host to eSATA target. 1m in length.
1m SFF-8470 to 4 x eSATA Fanout Cable
Shielded cabling. SFF-8470 device to eSATA host. 1m in length.
Shielded cabling. SFF-8470 device to eSATA host. 1m in length.
2m SFF-8470 to 4 x eSATA Fanout Cable
Shielded cabling. Host to eSATA target. 2m in length.
Shielded cabling. Host to eSATA target. 2m in length.
2m SFF-8470 to 4 x eSATA Fanout Cable
Shielded cabling. SFF-8470 device to eSATA host. 2m in length.
Shielded cabling. SFF-8470 device to eSATA host. 2m in length.
39" Internal 7 pin SATA Cable with Latches
Standard 1m cable length which often comes with controllers and backplanes.
Standard 1m cable length which often comes with controllers and backplanes.
Internal SATA to External 4X Adapter and 4X Cable Combo
This kit includes an adapter on an L bracket to convert 4 internal SATA I/II single drive 7 pin connectors to 1 external multilane 4X connector and a 1m external 4X thumbscrew cable. It will let you use our 4-bay SATA 4X enclosures with any SATA controller with the standard internal 7 pin connectors. Also includes (4) 18" internal SATA cables.
This kit includes an adapter on an L bracket to convert 4 internal SATA I/II single drive 7 pin connectors to 1 external multilane 4X connector and a 1m external 4X thumbscrew cable. It will let you use our 4-bay SATA 4X enclosures with any SATA controller with the standard internal 7 pin connectors. Also includes (4) 18" internal SATA cables.
Internal SATA to External 4X Adapter and 4X Cable Dual Combo
This kit includes an adapter on an L bracket to convert 8 internal SATA I/II single drive 7 pin connectors to 2 external multilane 4X connectors and two 1m external 4X thumbscrew cables. It will let you use our 8-bay SATA 4X enclosures with any SATA controller with the standard internal 7 pin connectors. Also includes (8) 18" internal SATA cables.
This kit includes an adapter on an L bracket to convert 8 internal SATA I/II single drive 7 pin connectors to 2 external multilane 4X connectors and two 1m external 4X thumbscrew cables. It will let you use our 8-bay SATA 4X enclosures with any SATA controller with the standard internal 7 pin connectors. Also includes (8) 18" internal SATA cables.
Internal SFF-8087 to SFF-8470 Enclosure 1-Port Adapter and Cable Combo
This kit combines 1 single-port L-bracket adapter, 1 external cable and 1 internal cable to connect your internal multilane SATA or SAS controller with SFF-8087 connectors to an external enclosure with SFF-8470 connectors. Supports 4 channels.
This kit combines 1 single-port L-bracket adapter, 1 external cable and 1 internal cable to connect your internal multilane SATA or SAS controller with SFF-8087 connectors to an external enclosure with SFF-8470 connectors. Supports 4 channels.
Internal SFF-8087 to SFF-8470 Enclosure 2-Port Adapter and Cable Combo
This kit combines 1 dual port L-bracket adapter, 2 external cables and 2 internal cable to connect your internal multilane SATA or SAS controller with SFF-8087 connectors to an external enclosure with SFF-8470 connectors. Supports a total of 8 channels.
This kit combines 1 dual port L-bracket adapter, 2 external cables and 2 internal cable to connect your internal multilane SATA or SAS controller with SFF-8087 connectors to an external enclosure with SFF-8470 connectors. Supports a total of 8 channels.
Internal SFF-8087 to SFF-8470 Enclosure 3-Port Adapter and Cable Combo
This kit combines 1 quad-port L-bracket adapter, 3 external cables and 3 internal cables to connect your internal multilane SATA or SAS controller with SFF-8087 connectors to an external enclosure with SFF-8470 connectors. Supports 12 channels.
This kit combines 1 quad-port L-bracket adapter, 3 external cables and 3 internal cables to connect your internal multilane SATA or SAS controller with SFF-8087 connectors to an external enclosure with SFF-8470 connectors. Supports 12 channels.
Internal SFF-8087 to SFF-8470 Enclosure 4-Port Adapter and Cable Combo
This kit combines 1 quad-port L-bracket adapter, 4 external cables and 4 internal cables to connect your internal multilane SATA or SAS controller with SFF-8087 connectors to an external enclosure with SFF-8470 connectors. Supports 16 channels.
This kit combines 1 quad-port L-bracket adapter, 4 external cables and 4 internal cables to connect your internal multilane SATA or SAS controller with SFF-8087 connectors to an external enclosure with SFF-8470 connectors. Supports 16 channels.
1m External SAS 4X to 4X Cable
High Quality Infiniband Multilane cable, SFF-8470 to SFF-8470, Thumbscrews on both ends, 1 meter length.
High Quality Infiniband Multilane cable, SFF-8470 to SFF-8470, Thumbscrews on both ends, 1 meter length.
 |
Our mission is to be competitive on selection and prices, while providing truly unmatched personal service. Everyone you reach here has in-depth experience with RAID storage. This means we can provide real-world insight into topics like performance, compatibility, bang for the buck, and the best solution for your needs. Call 1-800-298-4173, email sales@pc-pitstop.com, or click the live chat button for help.
|
We've been selling computer storage online since 1999 and have built a loyal following of Fortune 500 companies, educational institutions, government agencies, multimedia studios, consultants, you name it.
"The best customer service I have experienced from an online store. Emails answered 
within hours and an actual phone number that a human answers."  |
|||||
|
My Account |
Policies | Information | Availability | |
 Register (New) |
Privacy | About Us | Canada | ||
 Account Login |
Payment | St. Louis | Europe | ||
 Shopping Cart |
Shipping | Education | Australia | ||
 Order Status |
Returns | Government | Worldwide | ||
|
|||||
|
| Location: PC PitStop | 16321 Westwoods Business Park | Ellisville, MO 63021 |
| Toll Free: (800) 298-4173 | Local: (636) 527-5924 | Fax: (707) 598-2734 |
| Hours: Monday to Friday, 9AM - 5PM CST | Email: sales@pc-pitstop.com |
|
| Copyright © 1999-2012 PC PitStop, all rights reserved, all customers served |
