Direct Attached Storage (DAS)
DAS units are a great way to add storage to an existing server. Each unit has a built-in RAID controller which supports various RAID levels and is easily configured via software or an LCD interface. When attached to the server, the storage unit is seen as a single drive. Added storage capacity is virtually plug and play!
RAID provides data redundancy which is critical for servers. If a drive fails, you can replace it without having to turn off the system, and the DAS unit will rebuild the data automatically. Please note the units listed below do not include hard drives so you have the flexibility of using drives you already have, or you may buy any brand or size drive appropriate for the particular unit.
Typical Applications for Direct Attached Storage Subsystems: AV Storage, Clustering, Enterprise High Performance Systems, Disk to Disk Backup, High Definition Video Editing
2-bay external SATA enclosure with built in RAID controller and display. Connects to your PC through U160 SCSI interface. Supports RAID 1, RAID 0 and JBOD. Easy LCD configuration. Requires HD68 external cabling and terminator.
Supports five SATA II/I hard drives, up to 3TB of storage with RAID 5 using 750GB drives. Fast 500MHz processor, 512mb cache.
Supports eight SATA II/I hard drives, excellent OS independent external storage solution with built-in RAID 0, 10, 3, 5, 50, 6 and 60. Fast 500MHz processor, 400W PSU, 512mb cache. Connects to SCSI port on the server.
X4R is a cost effective and space-efficient rackmount DAS solution that is expandable from 4 to 8 hotswappable drives using our low-cost 1U SATA rackmount chassis. Supports all RAID levels including RAID6 throught the built-in high-performance controller and attaches to your server via the SCSI port. 275W 80Plus power supply, 4 high speed fans.
Supports 8 SATA I/II hard drives in a 2U rackmount chassis, fast 500mhz processor, 512MB RAM, 460W power supply, Hot swap drive trays, Connects to SCSI port on Server (U320 interface - U160 compatible). Supports all RAID levels including RAID6.
Supports 16 SATA I/II hard drives in a 3U rackmount chassis, fast 500mhz processor, 1GB RAM, 650W + 350W redundant power supply, Hot swap drive trays, Connects to SCSI port on Server (U320 interface - U160 compatible). Dual Channel.
The Internal RAID Subsystem features a IDE/SATA host attachment and SATA device attachment. Each system model allow one HDD failures without impact on the existing data and failed drive rebuild is transparent to the host. Environmental information is is accessible to either via the control panel or through serial port.
The Internal RAID Subsystem features a LVD SCSI host attachment and SATA device attachment. Each system model allow one HDD failures without impact on the existing data and failed drive rebuild is transparent to the host. Environmental information is is accessible to either via the control panel or through serial port.
Supports 8 SATA hard drives in a tower chassis. The JanusRAID SA-3340S provides a reliable, highly scalable solution for your DAS requirements.
Supports 8 SATA hard drives in a compact 2u chassis. The JanusRAID SA-4340S provides a reliable, highly scalable solution for your DAS requirements.
Supports 12 SATA hard drives in a compact 2u chassis. Dual U320 SCSI host channels and an upgraded CPU result in increased speed. The RAID controller, fans, and power supplies are modularized allowing for easy removal from the rear of the unit. The scalable, high performance, and highly reliable features make it an ideal choice for DAS.
Supports 16 SATA hard drives in a compact 3u chassis. Dual U320 SCSI host channels and an upgraded CPU result in increased speed. The RAID controller, fans, and power supplies are modularized to enable the least amount of operating downtime for maintenance. The scalable, high performance, and highly reliable features make it an ideal choice for DAS.
Supports 6 IDE hard drives, Intel i80303 RM RISC Microprocessor, 64mb RAM, 250W x 2 redundant power supply, Hot swap drive trays, Connects to SCSI port on Server
Supports 6 IDE hard drives in a 2u rackmount chassis, i80303 Intel RISC CPU, 64mb RAM, 250W x 2 redundant power supply, Hot swap drive trays, Connects to SCSI port on Server
|
| Copyright © 1999-2008 PC PitStop, all rights reserved (Why Buy From Us?) |
















